Category: Uncategorized

My Spirituality in woodworking post is the abridged transcript of a talk which I gave at a London Conference on the building force of Love/Wisdom in the creative arts. It may seem an odd subject for a website such as this to post. However, it is a reflection of the way I approach my work and for that reason alone may be of interest. More importantly it may lead you to look differently upon all crafts, your own work included. By doing so it is my wish that it may lead you to greater enjoyment from them and from life.

Spirituality in woodworking does contain some esoteric reference, but please do not let this put you off if your own beliefs lie elsewhere. Whatever one’s belief system may be and I include atheism as a belief system. One can agree that there is a common will to good that binds the whole of humanity, it is to this quality that I would draw your attention.

Lets us for a moment take a subjective look at craftsmanship, particularly the qualities that we humans may imbue into our creative work. We will examine the way in which Love and Wisdom influences all those things that we humans make, the things we make with our own hands in particular, and this could be absolutely anything at all, the only criteria is that we begin with an idea, a mental picture, or vision, which we then proceed to make manifest in some way or other.  I will also talk about the creative process that we go through and the dynamic relationship of all those elements that we collect and fuse together to complete our creation. Most importantly I wish to draw attention to the way in which we may consciously act as a conduit for the ray of Love Wisdom and therefore determine the inner quality of the finished work.

To help illustrate these points, I shall use the art of furniture making as a backdrop. Simply because that it is the area of creativity that I am most familiar with and it will easily act as a metaphor for most other forms of creativity and with a little imagination daily life as well. Especially if we first take a moment, to look past the mechanical aspect of furniture making, or woodworking in general for that matter, to observe what actually happens when an item is made from wood or any other material. The first noticeable thing or even the most noticeable thing that the craftsman can be seen to make, is a large pile of chips or sawdust. It could be said that he or she is a reductionist, although not in the philosophical sense, simply that the woodworker by various means of reduction alters the nature and form of the unprocessed timber to resemble his or her imagined idea. The craftsman by skilful and discriminative cuts removes that which hinders or veils that idea from being manifest; this process then is following a spiritual principle. Through conscious mental effort, the creative mental energy of the maker is worked out through various stages that manipulate substance and progressively allows a solid representation of his vision to take shape. In this instance, the process of manipulation is a trade that is also a learnt skill that takes a good number of years to acquire, a skill that is generally passed from master to apprentice.

The skill acquired is in essence that of energy direction to achieve a desired result, firstly there is the destroying energy of the first ray breaking down the old form, which is then balanced by the building energy of the second ray. A line of energy is constructed directly linking the vision to the completed form. When the craftsman consciously brings soul quality into this equation a vibratory rapport is established between all elements and his intention, something magical happens; beauty and livingness start to appear in his work.

Let’s just for a moment focus on the latter part of this statement, while at the same time reminding ourselves that the dense matter the craftsman is working with, is not in reality a principle. It is only a solid form of energy that can be utilised manipulated and caused to respond to the creative principle.  Also that all forms of energy have a positive and negative aspect, and it is the correct proportion and balance of these two opposites when measured with love that gives birth to beauty, that is animated by livingness that in turn are displayed in some form of utility. In utility beauty is given purpose, beauty alone, just for beauty’s sake would be redundant and in contradiction to the whole of nature, in nature everything has a use, no energy is wasted.

Mankind, blessed with freedom of choice, is not always conscious of this need to balance opposites and frequently ends-up getting it wrong; resulting in at best some form of nonsense or at worst a world catastrophe like climate change. The visionary first leader of the Shakers, Mother Anne Lee told her followers that “Beauty rests on Utility” and about a generation or so later William Morris famously said

“Have nothing in your house that you do not know to be useful, or believe to be beautiful” these ideas were later squared off by the modernists into the more industrial sounding “form follows function”

However, if in our imagination, we were to superimpose love-wisdom of the second ray over Morris’s and Lee’s notion of beauty and utility we would quickly realise that beauty is a manifestation of love and that utility is wisdom in action. We can clearly see that these two aspects cannot be separated or thrown out of balance without a negative effect on quality or fitness for purpose.  With conscious thought and active love a craftsman may endeavour to combine the elements of love-wisdom with his own unique soul quality to form a triangle of force that works out through the agency of his skill and knowledge in the desired form.

This brings me back to the chips and sawdust of shaping timber to resemble one’s vision, for the most part in the life of a furniture maker; this will mean making an interpretation of a clients need for some form of utility into solution. The creative process will begin as the maker finds a mental framework of solution to meet that need, followed by a rendering of detail, ranging from timber choice to final finish. By holding a mental picture of his client’s need and the client’s future use and pleasure as he or she discovers the beauty contained within that utility, the maker is adding a tangible yet subjective dimension to his creation, which is for him as yet still only an idea. We are told that “The unfoldment of the sense of vision and of the sense of synthesis, through visualisation, will lead to a sense of livingness in form”. If the craftsman can capture even a hint of that synthesis, he has introduced living energy into his idea.

The first physical form that this idea will take will probably be a sketch, followed by a drawing with dimensions and annotations. Personally I usually make a water colour sketch for the client and later make a full size drawing for the workshop from which I check measurements and use as reference. This frees up the mind, avoids silly mistakes and allows me to concentrate on the more ascetic aspects such as timber selection.

A woodworker will select timber with the same care and attention that he will use in making, while he is sorting through the woodpile, he will be asking himself questions. Like, will this plank make a good door panel? Or should I use it for the side and look for something with more character for the doors and top? Has this timber seasoned enough, is it stable? And so on, the questions are endless. Finally once the timber has been selected, it’s dimensioned, the joints are cut, all the other little details completed, then the whole is finish planed, and then assembled and polished, each process will have been accompanied by more questions and mindful fussing and checking to see if everything is right.

Now it would be more romantic if I were to say that all the operations were carried out by hand, but in this day and age this is not really practical, no one could really afford the cost of this and one needs to remain competitive if one is to stay in business. Therefore, all heavy and laborious work really needs to be carried out by machines. Although in a small independent workshop the maker will be doing all the pushing and pulling himself, so it is still a kind of hand process. However, no good furniture maker would ever dream of leaving any machine marks on his work; these will all be meticulously planed off by hand. It is at this point that the piece of furniture starts to develop a unique character and quality that is imparted by the maker’s hand; because the craftsman is working to the rule of risk, in contrast to the imposed monotony of an assembly line. Working by eye, each of his actions may leave a slight imperfection on the surface, but each cut will have been expertly and skilfully wrought, leaving each detail crisp and well defined. Each pass of a well tuned plane takes a gossamer thin shaving that leaves behind a surface that is imperceptibly refracted. The light plays across a surface prepared in this way that no other process can match. Here the maker has imparted a visual livingness that may give pleasure for centuries. DH Lawrence was perhaps thinking of this when he wrote these words:

“Things men have made with wakened hands, and put soft life into
are awake through years with transferred touch, and go on glowing
for long years.
And for this reason, some old things are lovely
warm still with the life of forgotten men who made them.”

From his writing, I think Lawrence had also recognised another even more important quality that a maker can impart into his work. Through his transferred touch and projected thought forms which literally soak into his work, his work piece begins to take on a special vibratory resonance. Something of the essence of the maker is captured in the very fabric of his creation. This aspect is recognised by a number of traditional Japanese disciplines, where it is believed that part of the craftsman’s soul resides in his work, co-existing with his dedication throughout the life of the object

Those who are sensitive will easily recognise this attribute in many different works, both old and new. For it is quite evident in the case of a fine piece of hand made furniture, that it displays some kind of special magnetic appeal to people, they are drawn towards it, almost certainly they will be inclined to run their hand across its surface and caress it. This does not happen with mass produced furniture, of course it may be admired, but I don’t believe I have ever seen such a piece caressed.

I will attempt to define what is taking place between the maker, his tools and his work that causes this remarkable effect.  Earlier we considered some of the mental processes involved in creativity, now I would like to talk a little about the more practical, physical process that allows that creative thought to work out into a finished object. To begin with the maker his tools and work need to be in balanced harmony, that is to say a certain dynamic of sensitivity needs to exist between them. Above all else the maker should have love in his heart, love for his work, without this love nothing very special is going to happen. Love for his client, even when they are being difficult, which  in my experience is very rare, because a client must place a great deal of trust in a craftsman and often part with a considerable amount of money, based solely on subjective reasoning. It is a marvellous thing this trust and is I believe part of what goes into the work. The craftsman must also have love for the timber he is working, it is after all a precious thing and I do not mean its cost. The now well seasoned, cut and planked timber was once a majestic tree that had sustained myriad life forms, created the air we breathe and conditioned the soil on which it stood, it provided shade for all who rested below it and added beauty to the landscape. That tree may be older than the craftsman by several hundred years, yet they are both animated by the one life, the craftsman must know all this and show gratitude to his brother tree if he is to work with him in harmony. Nearly all woodworkers that I have spoken to recognise this sense of fraternity with trees, or nature in general, although each has had his or her own special way of expressing this kinship. The timber from that tree will become a teacher if one has a mind to learn from it, but first one must develop the right organs to listen. When you do, the timber will tell you how it best likes to be cut or worked, it will also tell you of its attributes. It might say, “Look, the grain on this part of me runs out, it is very decorative to be sure and would make an excellent drawer front, but if you use me for a leg it will end in disaster; the craftsman must listen carefully because the voice of the timber is very gentle and soft.   A craftsman should also love his tools, especially those he has made himself, not in a covetous way, but in a way that will encourage them to respond to his touch. Just thinking that the tool he is using is a very fine tool that will bring the best out of the piece of wood on his bench is enough to align the maker with tool and work piece. In this way the tool becomes an extension of the maker’s hands as he focuses his knowledge and love on the work in front of him. The craftsman has become a channel through which the energy of the second ray of love wisdom may flow as he impresses his own unique quality into the finished piece.

In past centuries, craftsmen and artists were almost totally responsible for the built environment which created a quality and character that lives on in many surviving examples that we still value today. We can not go back to these times nor would it be desirable to do so, mankind must continue to penetrate, discover and understand matter, but in doing so we should be mindful of the more subtle qualities that we as human beings need in our environment, that we may maintain our sense of reality and not become disoriented slaves to our own inventions. It is difficult for man to form a synthetic bond between himself and industrially processed surroundings; it’s as if the thread of living energy has been cut. Perhaps we should then be mindful of William Morris’s words and populate our surroundings with objects that are both beautiful and useful, objects that can help raise the human condition above mundane desire, and towards creative thought and creative living..

A Little About the Shakers

Shaker Marching Dance

Shaker History or to use their full name, The United Society of Believers in Christ’s Second Appearing, can be traced back to 17^th century France and the Camisards.  These early French Calvinists flourished in the Cévennes Mountains, southern France and took their name from the Provence word “Camiso” for shirt.  Later, having lost their battle with the army of Louis XIV in 1706, some of the survivors, who came to be known as the French Prophets, were forced to flee to England.  This was to be a defining moment in Shaker History. These exiles continued to preach their beliefs, greatly influencing some groups of Quakers, or Society of Friends; founded by George Fox in 1652. Both the Camisards and Quakers believed that everyone could find God through personal experience, rather than through the the organised church. One such group, in Manchester England led by Jane and James Wardley, broke away from the Quakers to form their own group known both as the Wardley Society or Shaking Quakers. So named for their ecstatic form of worship, involving a marching dance where they would tremble and shake, with some falling into a trance. The Quakers themselves had a short time earlier decided to give up the

Ann Lee joined the society in 1758, becoming one of its most vocal proponents and was arrested on a number of occasions for disturbing the peace. She had visions during one such incarceration revealing how, through purity, mankind could find redemption. She made known these revelations to the society; then in 1770, probably as a direct result, was elected leader of the society, becoming known as “Mother Ann”.

Four years later and as a result of another vision, she left England for America, accompanied by seven followers. They arrived in New York on the 6th of August 1774. Their idea was to establish a communal utopian society, a popular idea at the time. Extolling the virtues of purity, pacifism, tolerance and equality of the sexes, they gained many enthusiastic followers, reaching a peak of membership in the early 19^th century of around 6000. Unfortunately, Mother Ann Lee died in 1784, without seeing the culmination of her life’s work. The Shakers succeeded in building 19 communities in total and were without doubt the most successful of all the utopian experiments of the 19th century. Sadly, decline set in following the American Civil War and by 1900 there were only 1000 followers.

Tree of Light

* * Between 1781 and 1783 the Mother, with chosen elders, visited her followers in New York, Massachusetts and Connecticut. She died in Niskayuna, New York onSeptember 8, 1784. James Whittaker was head of the Believers for three years. On his death he was succeeded by Joseph Meacham (1742–1796), who had been a Baptist minister in Enfield, Connecticut, and had, second only to Mother Ann, the spiritual gift of revelation. Under his rule and that of Lucy-Wright (1760 –1821), who shared the headship with him during his lifetime and then for twenty-five years ruled alone, the organization of the Shakers and, particularly, a rigidcommunalism (religious communism), began. By 1793 property had been made a “consecrated whole” in the different communities, but a “no communal order” also had been established, in which sympathizers with the principles of the Believers lived in families. The Shakers never forbade marriage, but refused to recognize it as a Christian institution since the second coming in the person of Mother Ann, and considered it less perfect than the celibate state.

Shaker communities in this period were established in 1790 at Hancock, West Pittsfield, Massachusetts; in 1791 at Harvard, Massachusetts; in 1792 at East Canterbury, New Hampshire (or Shaker Village); and in 1793 at Shirley, Massachusetts; at Enfield, Connecticut (then also known as Shaker Station); at Enfield, New Hampshire (or “Chosen Vale”); at Tyringham, Massachusetts, where the Society was afterwards abandoned, its members joining the communities in Hancock and Enfield; at New Gloucester, Maine (since 1890: “Sabbathday Lake”); and at Alfred, Maine, where, more than anywhere else among the Shakers, spiritualistic healing of the sick was practiced. In Kentucky and Ohio, Shakerism entered after the Cane Ridge, Kentucky revival of 1800–1801, and in 1805–1807 Shaker societies were founded at South Union, Logan County, Kentucky, and Pleasant Hill, Kentucky, Mercer County, Kentucky.* *                        * * Source http://en.wikipedia.org

It is not generally know that the Shakers were the first global business. Their products were sold throughout the British and French empires, which at that time covered most of the world, and also in a number of other countries. Their products included not only furniture, but herbal medicines, seeds and supplies to the pharmaceutical industry. These products were sold through agents like  A.J. White Co. The Shakers were the first to sell packet seeds. Their wagons being a familiar sight travelling the countryside. They also sold seeds by mail order. At the height of their production they were the largest suppliers of herbs to the pharmaceutical industry, listing over 400 species on their inventory.

Today a number of former communities have been turned into museums. The last remaining community continues with a small number of followers at Sabbathday Lake Maine.

The lives of the Shakers’ were strictly ordered with a law covering every aspect of daily life. These were known as the millennial laws. They were, however, revised from time to time, reflecting the Shakers flexibility to a changing world. This was a necessity. Because of the Shaker adherence to celibacy, the survival of the movement depended on recruits from outside.

Luckily for us their striving for perfection on earth has left us with a lasting testament to their Industry, in the shape of their furniture. By striping away unnecessary ornament and condemning beauty for beauty’s sake, the Shakers contrived to produce some of the most beautiful furniture made. “All beauty that has no foundation in use soon grows distasteful and needs continuous replacement with something new.” By concentrating on form and function they were probably 150 years ahead of their time; the precursors to the modern movement.

Shaker barn, Hancock, Massachusetts

 

www.shakermuseumandlibrary.org

www.cr.nps.gov

 

 

 

 

 

Furniture care; What you really need to know to keep your furniture looking good and to revive that tired looking antique buy.

Sound furniture care requires at least, a rudimentary knowledge of the  characteristics of natural timber. Timber is a natural organic material that reacts to all atmospheric conditions; even well seasoned timber will continue to move with the different humidity levels that will be present through the different seasons. Timber will swell in conditions of humidity and shrink in dry conditions. All good furniture makers know this and construct furniture in a way that minimises this phenomenon to the structure and apply appropriate finishes to lessen effects to surfaces; this has the added benefit of enhancing the furniture’s appearance. However, to remain looking good, furniture requires regular care and thoughtful attention throughout its life. We, today, have a problem that didn’t arise in our forebear’s time. The combined effect of double glazing and central heating; we could call this a clash of cultures, the past with the present. When cultures clash, there are generally casualties and in this particular case it is our treasured heirlooms.

All wood, as you know, needs to be seasoned and dried before it can be used. Air drying of timber was traditionally carried out by placing the timber outside, after it was cut into planks, with spacers called ‘stickers’ between each level. A temporary cover would then be placed over the stack, but not at the sides thus allowing the free movement of air. Later, after at least four or five years though often much longer, the timber was brought inside the workshop or factory to condition before being converted into furniture. This whole process reduced the timber moisture content to about 11 or 12 %. This was fine because the ambient moisture content of most homes was the same and furniture remained perfectly happy for hundreds of years, except for the occasional accident and untreated woodworm. By contrast, modern homes with central heating and double-glazing are about 8% ambient moisture content. This differential can be represented by a large crack in panels, loose fitting doors or draws and loose joints. The later problem will be exacerbated if the furniture was subjected to moisture before your acquired it, which will have degraded the hide glue. Chairs are particularly susceptible to this kind of degrade.

The worst effects of dryness can be offset by the use of an efficient humidifier. This will also have the added benefit of being really good for your own and the family’s health into the bargain. Ideally relative humidity should be maintained at 50 – 55%. Adequate ventilation is also essential. We are encouraged to consider the odd small draught as a mortal enemy, this is not so as a supply of fresh air is vital for the health of every one and everything in a home.

Direct sunlight is extremely harmful for furniture’s and can cause all kinds of severe damage over extended periods. It most definitely will lead to the breakdown of finishes and will also cause irreversible discolouration of the timber below if not worse. Even diffused light will have an effect; this generally goes unnoticed, unless for instance you habitually keep an ornament, or similar, in the same place on a surface. Eventually you will find a lighter, or in some cases darker, mark the same shape as the ornaments base. Keep ornaments by all means however, move them to different positions on a regular basis. Never ever place a piece of wooden furniture near a heat source, damage is inevitable; damp will cause a different type of damage and possibly rot in the extreme cases. The latter is unlikely in a modern home; however I have seen too many fine pieces damaged like this through bad storage.

Now that your heirloom is happily situated in a suitable position what could possibly go wrong now? Not too much to the structure it’s true, unless that is, you have a large marble statue precariously balanced above it, or your house is infested with woodworm, prone to flooding or earthquakes. That still leaves the finish and this is really the first thing most people notice about a fine piece of furniture. Most makers will have put a lot of effort in bringing out the timbers natural beauty to best effect and you will naturally want to keep it looking that way.

The method par excellence is simply dusting; this may sound too simple to be an effective furniture care tactic, but if done regularly, makes much else unnecessary.

However innocuous dust may seem, it can quickly damage a finish, especially the type of finish you will find on antique furniture. This is because it will attract any moisture that is in the air, mobilising any impurities trapped in the dust and helping them to migrate into the finish. Dust will also penetrate wax deposits left in corners or mouldings and form an unsightly build-up over time. Regular dusting helps stop this and, contrary to what the manufacturers of furniture care products tell you, it is not necessary to wax or spray furniture every time you dust, in fact this can work against you, by resulting in a greasy looking build up which will eventually mask the surface as it attracts even more air born dust and other pollutants. I have to mention here, it is impossible to feed or nourish wood, it’s dead and even if it were not, the finish, if it is doing its job properly, provides a barrier preventing the wax from actually getting to the timber. It is never the less better to dust with a damp cloth, rather than a dry one. Dust has microscopic particles of grit within it and a damp cloth helps lubricate and lift these without scratching. A polishers “tack cloth” is ideal for this, I shall describe how to make one at the end of this article.

You of course will have been scrupulous in the care of your furniture, but what if you have just acquired the piece and the previous owners were not as diligent in their duties. You may be facing some serious grime or even scratches.

Furniture with traditional finishes, may at first appear difficult and even daunting, because knowledge our grandparents used every day has been lost or forgotten and attracted a certain mystique. Especially French polish and most antique furniture and furniture produced before the 2^nd world war will probably have been finished with shellac, better known as French polish. This is the finish I use on all my new furniture, using different methods of application to suit the piece, shellac does not necessarily mean a high gloss finish, shellac is also completely non toxic, so much so it is used by the pharmaceutical industry to coat pills. You may occasionally also find an oil finish and some rustic pieces may have a burnished wax finish. All are relatively easy to care for if you follow a few simple guidelines.

Generally if your furniture is looking dull and dirty it is probably as a result of a grime and wax built up over many years. The safest and surest way to deal with this is to carefully wash this build up off. This may sound alarming at first, but if done properly, will remove 95% of all accumulated dirt. If necessary the last 5% or so can be removed with a solvent based cleaner and reviver, I’ll give the recipe for a first class one later.Or if you would prefer a ready to use version my Popote is an excellent  alternative.

To wash, place a little soap liquid VULPEX LIQUID SOAP is by far the best for this, and many other tasks in a shallow dish. Fill a small bowl, with warm water, choose a clean piece of cloth and have an old towel or similar to hand. Now dip the clean cloth into the warm water, just enough to dampen it. Then take a little soap liquid onto your dampened cloth squeezing out any excess on the edge of the dish. Then gently wash your piece of furniture using small firm movements, work only on one small area at a time. Dry thoroughly with the towel before moving onto the next area. You will be surprised how much dirt this removes. Some old heavily masked, or very large items may require several changes of water and cloths, so it’s a good idea to prepare these in advance. Although cleaning like this will be enough to revive most furniture, you may find some persistent stains like ink, water or oil that require further treatment, I’m a bit reluctant to describe the treatment for these here as it is easy to make mistakes if a defect is wrongly diagnosed. If you do have a particular stain that needs attention, contact me by email and I shall be happy to advise.

Next choose a good quality furniture wax work the wax polish into the surface very sparingly in a circular motion with a clean cloth (use a small brush for mouldings)  it is advisable to wait a 15 to 20 minuets  before buffing with a clean duster (use a clean brush to buff mouldings).

The results can be truly amazing. Frequent dusting, with waxing no more than once a year, will keep your heirloom looking good in the future. On pieces that are lightly used once every five years is enough to keep them looking good.

An old Waxed finish may be revived and cleaned by simply applying new wax ( a natural beeswax paste polish ) with 0000 grade wire wool. The new wax will soften the old wax and the wire wool will effectively remove blooms or marks, leaving enough wax behind to build a shine. As with all restorative work proceed lightly and slowly, testing results in an inconspicuous area, before proceeding with the whole project. Do not cut right back to the timber unless absolutely necessary and not before seeking further advice as necessary. Fill dents, holes etc as described with the appropriate colour wax filler stick.

If oil finishes have been waxed you may find that you can proceed as above. If however a more robust solution is called for, cut back the finish gently with 0000 wire wool and turpentine, then let dry thoroughly, as before do not if at all possible remove all the finish. Reapply a new coat of linseed oil ( boiled dries quicker or you can add a teaspoon full of driers to raw linseed oil mixture ) diluted to about 1 part turpentine and 2 parts linseed oil. Apply with brush or cloth, whichever proves easier, and leave for thirty minutes, then wipe off any excess with a clean lint free cloth and leave overnight to dry. It’s difficult to say when an oil finish is finished; Old timers say that oil should be applied once a day for a week, once a week for a month, once a month for a year and once a year for the rest of your life. So I shall leave you to deicide when it is ready. Oil will if built up over years give one of the most beautiful and deep shines, the secret is to give many light coats and let them thoroughly dry, before proceeding. Otherwise you will only achieve a soft dullish skin that will eventually wrinkle and crack as it dries. Oil, done well is also one of the most resistant finishes and easiest to repair, it can be waxed if you wish to take the shorter route to a shine. Soak all used rags in water before disposing and lay them out flat when not in use, while working.

Don’t use any commercial oil based scratch remedy, ever. Their reparative quality is temporary and disappears as the oil dries, however the dye they contain will have permanently stained the timber, marking the position of the scratch even after a proper repair has been made. The right way to repair a scratch is to first apply a little shellac into the scratch if it penetrates to the timber, quickly wipe off any that may have gone onto the surface. Now work a little appropriately coloured wax filler stick into the scratch and smooth with the flat of your finger nail. Allow to harden for a while before buffing. Wax filler sticks are available from finishing suppliers and here.

One final word of warning; don’t drag furniture when moving it, especially if it is on carpet. Damage of some kind is almost inevitable even if it may not be immediately evident, not to mention damage you may do to yourself.

 

I know there may be a lot of precautions and don’ts in the above that may make for dull reading, however it’s my intention that you avoid costly mistakes and that you have many years of trouble free enjoyment from your furniture.

 Furniture Care Recipe’s

Tack Cloth

Take about a 12’’ square of mutton cloth (if you pull a thread to start a hole 12’’ into the roll, then open this out into a tear, rather than cutting a piece off, you will find you do not get all those little bits of thread falling off) Wash this in cold water and wring out as much as you can. Next mix about an ounce of linseed oil with a similar amount of turpentine, white spirit will do the same job, but does not smell nearly so good, especially in the home. If you have it you could add a small amount of orange or lavender oil if you wish. Dip the cloth in this and take up as much liquid as possible then wring out and repeat, making sure to wring the cloth as hard as you can. Your tack cloth is now ready to use, you may at this point notice how clean and soft your hands are. Simply pull the cloth over your furniture to take up the dust and not rub the cloth into the furniture, used like this and stored in an airtight tin or plastic tub, it will last for months. Don’t omit the water; in fact all cloths that come into contact with organic oils should be soaked before disposing of after use. This prevents the chance of accidental combustion.

 

Recipe for reviver and cleaner:

Pure turpentine 200ml

Metholated spirit 100ml

Acetic acid B.P. 50ml

Soap liquid (Teepol or Vulpex is best although not necessary) 25ml

Brasso or similar 25ml or 15ml of Pre-Lim

Ammonia ½ teaspoon

Place all the ingredients into a half litre bottle with a secure top, starting with the turpentine and mentholated spirit.

Give the bottle a good shake to emulsify the ingredients. You will need to continue shaking the bottle during use.

Start by putting a small amount of reviver onto a clean cotton cloth and work in much the same way as you did when washing.

Use only on shellac or varnish that is in good condition. Cracks or gaps in the finish may cause you to work dirt into the timber below, which will then be extremely difficult to remove. The same applies to washing. Always seek further advice if you are uncertain about the condition of your furniture.

Phew! now you need to put your feet up